Back to Blog
Tips & Care 2026-11-14 Dr Browns 0 views

Glass Baby Bottle Care: Daily Tips for the 270ml Options+ Bottle

Glass Baby Bottle Care: Daily Tips for the 270ml Options+ Bottle

Keep your Dr Brown's Options+ 270ml glass bottle feeding well with practical daily care, cleaning, sterilising and safety-check routines.

A daily routine that protects the vent and the glass

The Dr Brown's Options+ Anti-Colic 270ml Single Glass Baby Bottle is built around a removable internal vent system. That vent is the reason the bottle is clinically proven to reduce windy colic, but it also means your daily care has two jobs: keep the vent parts clean and working, and treat the glass body gently so it lasts.

You do not need a long procedure. A short, consistent routine after each feed is enough to keep the bottle ready for the next use and to spot small issues before they become problems.

After each feed: a simple cleaning sequence

The supplied product information confirms the bottle is dishwasher (top rack) and steriliser safe. It does not include a separate hand-washing procedure, so the steps below are general good practice for any vented bottle rather than a manufacturer instruction.

  1. 1. Take the bottle apart fully: Separate the glass bottle, teat, collar and the internal green vent system. The vent is removable by design, and cleaning works best when every part is loose.
  2. 2. Rinse away milk residue straight after the feed: A quick rinse stops milk drying inside the vent channels. Pay attention to the small openings in the vent, where residue is easiest to miss.
  3. 3. Wash the parts: Use a bottle brush and warm soapy water, or place dishwasher-safe parts on the top rack. The supplied information lists top-rack dishwasher use as safe, but does not specify a temperature or cycle, so follow your machine's normal programme.
  4. 4. Sterilise when needed: The bottle is steriliser safe according to the supplied information. Sterilise the parts you normally sterilise, then let everything air-dry completely before reassembly.
  5. 5. Reassemble only when dry: Fit the vent system back into the bottle before adding the teat and collar. Store the bottle assembled and empty until the next feed.

Two vent options, two cleaning routines

The Options+ design lets you use the bottle with the internal vent system or without it. With the vent in place, you get the 100% vacuum-free feeding that is clinically proven to help reduce wind-related colic. Without it, the bottle becomes a teat-vented bottle for convenience when your baby no longer has feeding problems.

That choice changes your cleaning load. On days you use the internal vent, remember to clean and dry every vent part. On days you use the teat-vented setup, the bottle is quicker to wash, but you are choosing convenience over the full anti-colic function. Neither choice is wrong; just match the setup to how your baby is feeding that day.

What the 270ml Options+ bottle includes

  • Dr Brown's Options+ Anti-Colic 270ml Single Glass Baby Bottle: Pack includes 1 x 9 oz/270 ml Dr Brown's Glass Options+ Bottle with 1 x Level 1 Teat. Knowing exactly what comes in the box helps you plan cleaning and spare-part routines from day one.
    Dr Brown's Options+ Anti-Colic 270ml Single Glass Baby Bottle
    Dr Brown's Options+ Anti-Colic 270ml Single Glass Baby Bottle
  • Dr Brown's Options+ Anti-Colic 270ml Single Glass Baby Bottle: The unique internal green vent system creates 100% vacuum-free feeding, clinically proven to help reduce wind-related colic. The vent is the feature that makes this bottle different, so keeping it clean and correctly fitted is the core of daily care.
  • Dr Brown's Options+ Anti-Colic 270ml Single Glass Baby Bottle: The vent system can be removed when your baby no longer experiences feeding problems, turning the bottle into a teat-vented bottle. You can simplify cleaning later without buying a different bottle, but only when the anti-colic function is no longer needed.

Glass safety checks worth doing every week

Glass does not absorb smells or stains the way some plastics can, but it can chip or crack if it is knocked. The supplied information does not include a formal inspection schedule, so treat these as sensible checks rather than a manufacturer requirement.

Run your finger around the rim and the base of the bottle. If you feel a chip, a rough edge or a hairline crack, stop using that bottle. Small chips can worsen with heat and washing, and a damaged rim may not seal properly with the collar. Check the teat as well: look for thinning, sticky patches or tears, and replace it if it looks worn. The bottle is dishwasher and steriliser safe, but repeated heat cycles are a good reason to look closely at both glass and teat.

Sterilising tips that suit a glass bottle

The supplied information confirms steriliser safety but does not name a method, time or temperature. Use the instructions that came with your steriliser or the method you normally use for baby feeding equipment.

  • Sterilise parts, not just the bottle: The teat, collar and vent system all contact milk, so include them in the same sterilising cycle you use for the bottle.
  • Let glass cool before handling: Glass retains heat after sterilising. Give it a moment to cool before reassembling so you do not burn your hands or distort the teat.
  • Dry fully before storing: Trapped moisture in the vent or teat can leave the bottle less fresh between feeds. Air-dry on a clean rack rather than drying with a cloth.
  • Keep the vent clear: If water remains in the vent after sterilising, shake it out gently and let it air-dry. A blocked or wet vent can affect how the bottle feeds.

When to simplify or replace

The Options+ bottle is designed to grow with your baby. Once your baby no longer experiences feeding problems, you can remove the internal vent and use the bottle as a teat-vented bottle. That is the point to simplify your cleaning routine, not before.

Replace the bottle if the glass is chipped or cracked. Replace the teat if it shows wear. The supplied information does not give a replacement interval for the vent system, so inspect it for cracks, stretched openings or residue you cannot remove, and replace it if you are unsure. A 270ml glass bottle with a clean, intact vent and teat is the setup the product was designed around.

Related Articles

Customer Service
Home
Products
Cart
Profile